Wednesday, October 31, 2012

Interview Questions for Pharmaceutical industry related jobs (QA,QC,Production,RA,f&d) for B.pharma /M.pharma (Part 1)


  • Interview questions mostly asked during technical round in Production :

01. Q. Which type of tablets are exempted from Disintegration testing?
A. Chewable Tablets


02. Q.What are the common variables in the manufacturing of tablets?
A.
·       Particle size of the drug substance
·       Bulk density of drug substance/excipients
·       Powder load in granulator
·       Amount & concentration of binder
·       Mixer speed & mixing timings
·       Granulation moisture content
·       Milling conditions
·       Lubricant blending times
·       Tablet hardness
·       Coating solution spray rate

03. Q. Whether bracketing & validation concept can be applied in process validation?
A.Both Matrixing & Bracketing’s can be applied in validation studies.
Matrixing
Different strength of same product
Different size of same equipment
Bracketting - Evaluating extremes
Largest and smallest fill volumes
Fastest and slowest operating speeds

04. Q. What is the difference between calibration and Validation?
A. Calibration is a demonstration that, a particular
Instrument or device produces results with in specified limits by comparisons with those produced by a reference or traceable standard over an appropriate range of measurements.
Where as Validation is a documented program that provides high degree of assurance that a specific process, method or system consistently produces a result meeting pre-determined acceptance criteria.

05. Q. WHAT ARE GOOD MANUFACTURING PRACTICES (GMP)?
A.  Good Manufacturing Practices are a set of regulations, codes, and guidelines for the manufacture of: Drug substances and drug products, Medical devices, In vivo and in vitro diagnostic products, Foods
The term "cGMP" is used by the federal government as current good manufacturing practices. By definition, "cGMP" indicates that the current GMP - which is "state of the art" - can change. "GMP" and "cGMP" are often used interchangeably and essentially they have the same meaning.

06. Q. WHO ENFORCES GOOD MANUFACTURING PRACTICES (GMP)?
A.  Good Manufacturing Practices are enforced in the United States by the FDA (Food   and Drug Administration)
Good Manufacturing Practices are enforced in the United Kingdom by the Medicines and Healthcare Products Regulatory Agency (MHRA)
Good Manufacturing Practices are enforced in Australia by the Therapeutical Goods Administration (TGA)
Good Manufacturing Practices are enforced in India by the Ministry of Health, multinational and/or foreign enterprises and those individuals in the following positions:
Each of the inspectorates carry out routine GMP inspections to ensure that drug products are produced safely and correctly.
 
 07.Q.LIST OUT THE APPEARANCE DEFECTS OF TABLES DURING COMPRESSION ACTIVITY ?

Capping:- ‘Capping’ is the term used, when the upper or lower segment of the tablet separates horizontally, either partially or completely from the main body of a tablet and comes off as a cap, during ejection from the tablet press, or during subsequent handling.

Laminating:- ‘Lamination’ is the separation of a tablet into two or more distinct horizontal layers.
   
Sticking/filming: ‘ Sticking’ refers to the tablet material adhering to the die wall. Filming is a slow form of sticking and is largely due to excess moisture in the granulation.

Cracking:-  Small fine cracks observed on the upper and lower center surface of the tablets, or very rarely on the side wall are referred to as cracks.
   
Chipping:- ‘ Chipping’ is defined as the breaking of tablet edges, while the tablet leaves the press or during subsequent handling and coating operation.
   
Mottling:‘ Mottling’ is the term used to describe an unequal distribution of colour on a tablet.
   
Double Impression: ‘ Double impression’ involves only those punches,which have a monogram or other engraving on them.


8. Q What is the standard number of rotations used for friability test?
A. 100 rotations


9. Q What is the fall height of the tablets in the friabilator during friability testing?
A. 6 inches.Tablets falls from 6 inches height in each turn within the apparatus.
 

10.  Q Which capsule is bigger in size - size '0' or size '1'? 
A. '0' size 

11. Define process flow of API manufacturing?

12. Define process flow of Tablet manufacturing?

13. Define process flow of Sterile Lyophilized manufacturing?

14. Define process flow of Biotech product manufacturing?

15. Define Troubleshooting approach for problems related to particulate matter:

16. Preformulation research involves pharmaceutical and analytical investigations that both precede and support formulation development efforts for all dosage forms, please provide some example:


  • Interview question mostly ask during HR round:

1. Tell me about yourself.
2. What are your two best points?
3. What are your two weakest points?
4. What are three things you want to change about yourself?
5. How do you handle conflict?
6. Explain your leadership/research/volunteer experiences?
7. What extracurricular activities are you engaged in?
8. Where do you see yourself in five/ten years?
9. What do you do in your spare time?
10. What do you do to relieve stress?
11. What qualities do you have that you think are important for an effective leader to have?

Interview question mostly ask for fresher in B.pharm or M.pharm:

1. Describe your project work during M.Pharm.
2. Equipment knowledge and handling during project B.pharm or M.pharm

  • Other related link

     

30 comments:

  1. Good information. Thank you very much.

    ReplyDelete
  2. If you can provide us some example answers regarding HR questions as a pharmacy student applying to an industry, it will be more informative. Please do that for me.

    ReplyDelete
    Replies
    1. Top HR Interview Question - "Tell Me About Yourself" Answered

      Do you know why this question is asked so often in most job interviews? This question is actually an ice-breaker. Asking this question starts the conversion. So you should better be ready with an answer. This question gives the interviewer a chance to know about the interviewee. Once you start talking about yourself, interviewer starts preparing his/her next question. So there are high chances that the next question that would be fired on you will be based on the answer of this question. As the answer for this will be based on you, you think and prepare it before the interview.

      While preparing for the answer consider including following points.

      1. You:

      Tell them your name and which place you are from. Suppose you are "Srinivs", then do not start with "Myself Srinivas"; start with "I am Srinivas". This is a very common mistake. Not acceptable in interviews especially in call center jobs.

      You may talk about your family (cover up in short); you may talk about your how you came to the city, etc.

      2. Your education:

      Tell them about your education i.e. graduation/post-graduation. If you are a fresher then tell them the grades you got. If you have done something different than others then tell them. It surely adds a value!

      3. Your experience:

      Talk about your whole experience. Start from early years and gradually come to recent years. If you have a long experience then you must not be doing same thing all years. Then exactly what you were doing? This is what your interviewer wants to listen. If you are a fresher then talk about your projects.

      4. Your experience regarding to the post you has applied for:

      This is of most interest to your interviewer. You may be having lot of experience but how much experience you have regarding current job post is very important. If you do not have it then you can talk about some related experience. Or if you do not have related experience too then say it clearly. Buy along with it give them confidence that you can do it and you have genuine interest to do it.

      Fresh candidates who do not have any kind of experience, you should show some positive attitude and exhibit willingness to learn and do new things. Be ready to do new things. Don't worry that you will make mistakes. Fresher candidates are expected to do mistakes and your employers are well aware of it so you don't have any reason to be afraid. Believe me no one will give you more work than you can handle.

      5. Do not describe your salary or pay scale at this point of time (unless explicitly asked).

      6. Avoid giving unnecessary details. Value your interviewer's time.

      7. The idle answer should not last more than 1 minute.

      All the best

      Delete
  3. what is the composition of CAT in QA

    ReplyDelete
  4. THANK YOU SIR..

    ReplyDelete
  5. Very useful information
    Thank you very much

    ReplyDelete
  6. Very nice recommendation

    ReplyDelete
  7. thank you for providing this matter

    ReplyDelete
  8. This comment has been removed by the author.

    ReplyDelete
  9. Thank you so much for writing in detail about interview questions for pharmaceutical industry. That post is written in depth and no doubt that's very helpful. top phone interview questions

    ReplyDelete
  10. Very good post. its very beneficial to All. Need a latest Job opening updates. Visit Here www.universejobs.com

    ReplyDelete
  11. Thank you brother your given information helpful to us

    ReplyDelete
  12. valuable information, thanks a lot

    ReplyDelete
  13. a very valuable and detailed post about the interviews questions. thanks for sharing. For more Job career tips visit us @ CelebrateJobs

    ReplyDelete
  14. Sir Ian pappu. I want to job of production in pharmacy. I have graduate degree with chemistry hon. Give some suggestions who to inter in this job

    ReplyDelete
  15. You actually make it seems really easy with your presentation, however, I find this matter to be actually something that I feel I might never understand. But credits to you, the way you've explained it. Thumbs up for you guys excellent work done by you.

    10 Best Medical Marketing Media Strategies that Really Work - Optimized360.Com

    ReplyDelete
  16. I need help.Please share information for GMP Audit process,Role of GMP Auditor specially for Third Party audits.

    ReplyDelete
  17. This is best information to the pharma industry feild

    Thank u sir

    ReplyDelete
  18. Thanks for sharing the best interview questions to practice and also get Part time job in Lucknow with best one to one job assistance only on Job vacancy result.

    ReplyDelete

Featured Post

Complication in Pharma industry with stability issue and salary expectation in Indian scenario

Now a days the pattern of interview is very interesting in pharma industry. The main argument comes with following points, Exp...